Setting The Original Onto The Glass - Konica Minolta 7415 Service Handbook

Setting the original onto the glass

General Documents
<When setting documents of plain or thick paper
types>
Open the Original Cover.
1
Set the document onto the glass with the side
that you wish to copy facing down.
Align the centre of the original with the scale
2
marker.
Gently close the Original Cover.
3
NOTES
• When copying larger documents that are bound
together, such as the pages of a book, do not
close the Original Cover of the machine.
• Do not place documents that exceed 3 kg onto
the Original Glass. Do not press or apply
pressure upon original documents once they
have been placed on top of the Original Glass
as damage may result.
• Do not look directly at the bright beam of light
that is emitted through the Original Glass
during operation.
Transparent Documents
<When setting OHP transparencies or tracing
paper>
Follow the same procedure as described for
1
general documents.
C4007O101CA Place a blank sheet of paper of the same size
2
as the original on top of the original.
Gently close the Original Cover.
3
C4007O136CA
2. Setting the Original Document
C4007O101CA
C4007O104CA
3-5