Usb Hid; Usb Com Port Emulation - Hand Held Products 2020 System Manual

USB HID

Scan the following code to program the IT4620 for USB HID bar code imagers.
Scanning this code changes the terminal ID to 131.
USB HID Bar Code Imager

USB Com Port Emulation

Scan the following code to program the IT4620 to emulate a regular RS-232-
based Com Port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Hand Held Products website (www.handheld.com).
The driver will use the next available Com Port number. Apple® Macintosh
computers recognize the imager as a USB CDC class device and automatically
uses a class driver. Scanning the code below changes the terminal ID to 130.
USB COM Port Emulation
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode
ACK/NAK Mode On
* ACK/NAK Mode Off
IMAGETEAM™ 2020/4620 System Manual 2 - 5