Programming The Interface - Plug And Play; Usb Pc Or Macintosh Keyboard; Usb Hid - Hand Held Products 4800p User Manual

Programming the Interface - Plug and Play

Plug and Play bar codes provide instant imager set up for commonly used
interfaces.
Note: After you scan one of the codes, power cycle the host terminal to have the
interface in effect.
Note: See "Imager Models"
your imager.
USB PC or Macintosh
Scan one of the following codes to program the imager for USB PC Keyboard or
USB Macintosh Keyboard. Scanning these codes adds a CR and selects the
terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard - 125, USB
Japanese Keyboard - 134).
USB Keyboard (PC)
USB Japanese Keyboard (PC)

USB HID

Scan the following code to program the imager for USB HID bar code imagers.
Scanning this code changes the terminal ID to 131.
1 - 4
on page 1-2 to determine which interfaces apply to
® Keyboard
USB HID Bar Code Imager
USB Keyboard (Mac)
4800p 2D Imager User's Guide