Oemsetupcode11; Oemsetupcode128 - Hand Held Products 4X00 Software Manual

Parameters
nMinLength
The minimum length decoded Codablock message the engine should return. Codablock messages smaller than this
minimum length are not reported by the engine. The minimum allowable value (as well as the default) is 0.
nMaxLength
The maximum length decoded Codablock message the engine should return. Codablock messages larger than this
maximum length are not reported by the engine. The maximum allowable value (as well as the default) is 2048.

oemSetupCode11

This function is used to set the Code 11 symbology-specific options.
Result_t oemSetupCode11 (
BOOL bTwoCheckDigits,
WORD nMinLength,
WORD nMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
bTwoCheckDigits
If TRUE, the engine only decodes Code 11 bar codes printed with two check digits. Otherwise, the engine decodes
Code 11 bar codes as if they were printed with only one check digit. The default value is TRUE.
nMinLength
The minimum length decoded Code 11 message the engine should return. Code 11 messages smaller than this
minimum length are not reported by the engine. The default value is 4, and the minimum allowable value is 1.
nMaxLength
The maximum length decoded Code 11 message the engine should return. Code 11 messages larger than this
maximum length are not reported by the engine. The maximum allowable value (as well as the default) is 80.

oemSetupCode128

This function is used to set the Code 128 symbology-specific options.
Result_t oemSetupCode128 (
WORD nMinLength,
WORD nMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
nMinLength
The minimum length decoded Code 128 message the engine should return. Code 128 messages smaller than this
minimum length are not reported by the engine. The minimum allowable value (as well as the default) is 0.
nMaxLength
The maximum length decoded Code 128 message the engine should return. Code 128 messages larger than this
maximum length are not reported by the engine. The maximum allowable value (as well as the default) is 80.
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User's Guide 2 - 49