Oemimagestreamstop; Oemleavelightson; Oemlightson; Oempoweroffimager - Hand Held Products 4X00 Software Manual

oemImageStreamStop

This function causes the Image Engine to stop continous collecting of images started by oemImageStreamInit() and
oemImageStreamStart(). If this function is not called, the imager will continue to acquire images (illumination will stay on) which
causes serious drain battery power.
Result_t oemImageStreamStop ()
Return Values
RESULT_SUCCESS
Parameters
None.

oemLeaveLightsOn

This function configures the illumination LEDs to always be on, or in normal mode during scanning.
Result_t oemLeaveLightsOn (
SetupType_t SetupType,
BOOL bEnable
Return Values
RESULT_SUCCESS
RESULT_ERR_NOTCONNECTED
RESULT_ERR_UNSUPPORTED
RESULT_ERR_DRIVER
RESULT_ERR_PARAMETER
RESULT_ERR_NORESPONSE
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
bEnable
If FALSE, the illumination LEDs will be in normal operational mode and will be flashed on and off during scanning. If
TRUE, the illumination LEDs are always on during scanning and will not flash.

oemLightsOn

This function turns the engine's illumination LEDs on and off.
Result_t oemLightsOn (
BOOL bEnable
)
Return Values
RESULT_SUCCESS
RESULT_ERR_DRIVER
RESULT_ERR_NORESPONSE
Parameters
bEnable
If TRUE, the illumination LEDs are turned on; otherwise they're turned off.

oemPowerOffImager

Note: This function is only available to certain applications, and is dependent upon the hardware that supplies switchable power
to the imager (V).
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User's Guide
)
2 - 43