Oemgetsetupean13 - Hand Held Products 4X00 Software Manual

Imageteam 4x00 series software development kit (sdk)

Hide thumbs Also See for 4X00:

User manual (24 pages)

Table Of Contents

Table of Contents

Parameters

SetupType

SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.

pEnabled

Points to a BOOL variable that contains the enabled state of this symbology upon returning from the function. A TRUE

means the symbology is enabled; a FALSE means the symbology is disabled.

bXmitCheckChar

Points to a BOOL variable that determines if the engine will return the check character as part of the data string after a

successful decode. If TRUE, the engine returns the check character. If FALSE, the check character is not returned.

The default value is FALSE.

pAddendaReq

Points to a BOOL variable that determines if the engine will decode only EAN bar codes that have a 2 or 5 digit addenda.

If TRUE, the engine decodes only EAN symbols with an addenda. If FALSE, the engine decodes all enabled EAN

symbols. The default value is FALSE.

bAddendaSeparator

Points to a BOOL variable that determines if there is a space character between the data from the bar code and the

data from the addenda. If TRUE, there is a space. If FALSE, there is no space. The default value is FALSE.

bAddenda2Digit

Points to a BOOL variable that determines if the engine will look for a 2 digit addenda at the end of the EAN bar code.

If TRUE, and an addenda is present, the engine adds the two digit addenda data to the end of the message. If FALSE,

the engine ignores addenda data. The default value is FALSE.

bAddenda5Digit

Points to a BOOL variable that determines if the engine will look for a 5 digit addenda at the end of the EAN bar code.

If TRUE, and an addenda is present, the engine adds the five digit addenda data to the end of the message. If FALSE,

the engine ignores addenda data. The default value is FALSE.