Oemgetsetupcouponcode; Oemgetsetupdatamatrix - Hand Held Products 4X00 Software Manual

oemGetSetupCouponCode

This function is used to get the UPC-A with extended Coupon Code symbology specific options.
Result_t oemGetSetupCouponCode (
SetupType_t SetupType,
BOOL *pEnabled
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
pEnabled
Points to a BOOL variable that contains the enabled state of this symbology upon returning from the function. A TRUE
means the symbology is enabled; a FALSE means the symbology is disabled.

oemGetSetupDataMatrix

This function is used to get the Data Matrix symbology-specific options.
Result_t oemGetSetupDataMatrix (
SetupType_t SetupType,
BOOL *pEnabled,
WORD *pMinLength,
WORD *pMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
pEnabled
Points to a BOOL variable that contains the enabled state of this symbology upon returning from the function. A TRUE
means the symbology is enabled; a FALSE means the symbology is disabled.
pMinLength
Points to a WORD variable that contains the minimum length decoded Data Matrix message the engine should return.
Data Matrix messages smaller than this minimum length are not reported by the engine. The default value is 1.
pMaxLength
Points to a WORD variable that contains the maximum length decoded Data Matrix message the engine should return.
Data Matrix messages larger than this maximum length are reported by the engine. The default value is 1500.
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User's Guide 2 - 23