Oemgetsetupimager; Oemgetsetupint25 - Hand Held Products 4X00 Software Manual

oemGetSetupImager

This function gets the current Imager setup values.
Prototype
Result_t oemGetSetupImager (
SetupType_t SetupType,
ImagerSetup_t *pImagerSetup
)
Return Values
RESULT_SUCCESS
Parameters
pImagerSetup
Data structure that sets up the Imager. See
SetupType
This parameter is ignored.

oemGetSetupInt25

This function is used to get the Interleaved 2 of 5 symbology-specific options.
Result_t oemGetSetupInt25 (
SetupType_t SetupType,
BOOL *pEnabled,
WORD *pMinLength,
WORD *pMaxLength,
BOOL *pbCheckDigitOn,
BOOL *pbXmitCheckDigit
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
pEnabled
Points to a BOOL variable that contains the enabled state of this symbology upon returning from the function. A TRUE
means the symbology is enabled; a FALSE means the symbology is disabled.
pMinLength
Points to a WORD variable that contains the minimum length decoded Interleaved 2 of 5 message the engine should
return. Interleaved 2 of 5 messages smaller than this minimum length are not reported by the engine. The default value
is 4.
pMaxLength
Points to a WORD variable that contains the maximum length decoded Interleaved 2 of 5 message the engine should
return. Interleaved 2 of 5 messages larger than this maximum length are reported by the engine. The default value is 80.
pbCheckDigitOn
Points to a BOOL variable that determines if the engine will read Interleaved 2 of 5 bar codes with or without check
characters. If TRUE, the engine only decodes Interleaved 2 of 5 codes with a check digit. If FALSE, the decoder
decodes codes with or without a check digit. The default value is FALSE.
pbXmitCheckDigit
Points to a BOOL variable that determines if the engine will return the check digit as part of the data string after a
successful decode. If TRUE, the engine returns the check digit. If FALSE, the check digit is not returned. The default
value is FALSE.
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User's Guide
oemAcquireImage (page 2-1) for details.
2 - 27