Advertisement
power unit
G
Wipe with a damp cloth, then dry.
blade unit
1 Remove and wash the sealing ring.
2 Don't touch the sharp blades - brush
them clean using hot soapy water,
then rinse thoroughly under the tap.
Don't immerse the blade assembly in
water.
3 Leave to dry upside down away from
children.
lid, cap, stirrer
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seals are
correctly positioned on the goblet
dismantling the tap
1 Hold the tap by the lever. Push up
on the plug
in the direction indicated
2 Unscrew the cap
3 Remove the spring
4 Push up on the plug on the inside of
the tap
and at the same time pull
the plug from above
5 Wash all the components, then dry
thoroughly.
6 Reassemble the unit by reversing the
above procedure.
whilst sliding the lever
.
.
.
.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
If you need help with:
G
using your Smoothie Blender
G
servicing or repairs (in or out of
guarantee)
call Kenwood Customer Care on
023 92392333. Have your
model number ready - it's
located on the underside of the
power unit.
.
G
spares and attachments
call 0870 2413653.
other countries
G
Contact the shop where you bought
.
your Smoothie Blender.
guarantee (UK only)
If your Smoothie Blender goes
wrong within one year from the date
you bought it, we will repair or
replace it free of charge provided:
G
you have not misused, neglected or
damaged it;
G
it has not been modified (unless by
Kenwood);
G
it is not second-hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly;
and
G
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
4
Advertisement
