Chapter 6 Advanced Setup
This chapter explains: WAN, LAN, Routing, DSL and Port Mapping......
VPI/VCI
Con. ID
Category
Service
Interface
Protocol
IGMP
QoS
VLanID
State
ATM VPI (0-255) / VCI (32-65535)
ID for WAN connection
ATM service category, e.g. UBR, CBR...
Name of the WAN connection
Name of the interface for WAN
Shows bridge or router mode
Shows enable or disable IGMP proxy
Shows enable or disable QoS
•
This function means one can add an
802.1Q VLAN tag on PPPoE/MER or Bridge
mode.
It means the packets are sent to WAN and a
specific VlanID (802.1Q tag) will be added in the
Ethernet header. The VlanID shows which 802.1Q
tag will be added.
Shows enable or disable WAN connection
47