Chapter 6 Advanced Setup
This chapter explains: WAN, LAN, Routing, DSL and Port Mapping......
VPI/VCI
Con. ID
Category
Service
Interface
Protocol
IGMP
QoS
VLanID
State
It means the packet send to WAN and it will be added specific vlan id(802.1Q
tag) on ethernet header. The VlanID shows to which 802.1Q tag will be added.
ATM VPI (0-255) / VCI (32-65535)
ID for WAN connection
ATM service category, e.g. UBR, CBR...
Name of the WAN connection
Name of the interface for WAN
Shows bridge or router mode
Shows enable or disable IGMP proxy
Shows enable or disable QoS
This function means one can add a 802.1Q VLAN
tag on PPPoE/MER or Bridge mode.
Shows enable or disable WAN connection
44