ADSL
Synchronization
ISP Connection
If router mode is PPPoE the following screen will be displayed (for your reference).
Down: Indicates that the DSL Router does not detect the
wireless network.
Pass: Indicates that the DSL modem has detected a DSL
signal from the telephone company. A solid WAN LED on the
router also indicates the detection of a DSL signal from the
telephone company.
Fail: indicates that the DSL modem does not detect a signal
from the telephone company's DSL network. The WAN LED
will stop blinking (i.e. training) and the LED will stop
illuminating (i.e. go blank).
Pass: Indicates we can access the WAN service like the
Gateway and DNS.
Fail: Indicates we cannot access the WAN side.
84