Comtrend Corporation CT-536+ User Manual page 82

Beacon Interval The amount of time between beacon transmissions. Each beacon
transmission identifies the presence of an access point. By
default, radio NICs passively scan all RF channels and listen for
beacons coming from access points to find a suitable access point.
Before a station enters power save mode, the station needs the
beacon interval to know when to wake up to receive the beacon
(and learn whether there are buffered frames at the access point).
The entered value is represented in ms. Default is 100.
Acceptable entry range is 1 to 0xffff (65535)
TM
Xpress Xpress Technology is compliant with draft specifications of two
Technology planned wireless industry standards.
Wireless Media Provides an interim QoS solution for 802.11 networks until the
Extension release of 802.11e. WRAP (Wireless Robust Authenticated
Protocol) An encryption protocol in the 802.11i standard. WRAP is
based upon the Offset Codebook (OCB) mode of AES. WRAP is
being replaced with CCMP.
TM
54g Mode Select the mode to 54g Auto for
the widest compatibility. Select the mode to
54g Performance for the fastest performance
among 54g certified equipment. Set
the mode to 54g LRS if you are experiencing
difficulty with legacy 802.11b equipment.
54g Protection In Auto mode the router will use
RTS/CTS to improve 802.11g performance in
mixed 802.11g/802.11b networks. Turn
protection off to maximize 802.11g throughput
under most conditions.
WMM (Wi-Fi This is a standard that is meant to improve audio, video and voice
Multimedia) applications transmitted over a wireless network.
81