Comtrend Corporation CT-536+ User Manual page 35

Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
MTU
This option allows us to change the MTU size for WAN interface, PPPoE and PPPoA. The
default value is 1492 for PPPoE and 1500 for PPPoA.
3. After entering your settings, select Next. The following screen appears. This
page allows the user to configure the LAN interface IP address, subnet mask and
DHCP server. If the user would like this ADSL router to assign dynamic IP address,
DNS server and default gateways to other LAN devices, select the button Enable
DHCP server on the LAN to enter the starting IP address and end IP address and
DHCP leased time.
Select Enable DHCP Server Relay (if required), and enter the DHCP Server IP
Address.
34