Calculated Industries CONSTRUCTION MASTER IV User Manual page 6

Dimension Keys
[Weight] — Weight Key
Enters or converts (a volume value)
to tons, pounds, metric tons or kilo-
grams. Repeated presses will cycle
through these units.
[Conv] [%] — Weight/Volume
Enters or converts the Weight per
Volume setting
Lbs/Yd³, Lb/Ft³, Metric Ton/m³ or
kg/m³. Repeated presses will cycle
through these settings.
[Cu] — Cubic Key
Defines a volume (5 [Cu] [Yds]).
[Sq] — Square Key
Defines an area (5 [Sq] [Feet]).
[Yds] — Yards Key
Enters or converts to yards.
[Feet] — Feet Key
Enters or converts to feet as whole
or decimal numbers. Also used with
the [Inch] and [/] keys for entering
Feet-Inch values (6 [Feet] 9 [Inch] 1
[/] 2). Repeated presses toggle be-
tween Feet-Inch and Decimal Feet.
6 — Construction Master IV
as Tons/Yard³,