Guide Program Numbers - JVC HR-J680EK Instructions Manual

56 advanced features

Guide Program Numbers

Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
• using a PlusCode does not identify a preset number automatically
• you add a channel after Auto Setup or Preset Download has been performed
• you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen
the A and B buttons and press O (or E). Move the highlight bar to
using the A and B buttons and press O (or E).
SET
enter guide prog number
Program number for the TV station shown then press O (or E).
enter receiving preset number
'0') to select
to enter the receiving preset number that the VCR or satellite
receiver uses to receive the TV station then press O (or E).
satellite receiver users
programme with the VIDEO Plus+ system, you need to install
the provided Satellite Controller and perform the procedure
described in
return to normal screen
Use the A and B buttons to enter the correct Guide
or . Use the A and B buttons
TV PROG SAT
To timer-record a satellite
Satellite Receiver Control Setting
Press m.
Press m. Move the highlight bar to
Press AUX (number key
( pg. 36).
using
INITIAL SET
GUIDE PROG
GUIDE PROG SET
GUIDE PROG TV PROG
4 4
F
CH4
[1] a k [0]: SAT
[MENU]: EXIT