Table of Contents
Advertisement
Useful Features
Hard Disk Maintenance
When a power failure occurs while in the Recording mode or
Alarm Record Standby mode, or when a failure occurs in the
recorded data on the hard disk, recording/playback may not
function properly. To repair the hard disk, two types of scan disk
functions are available on the VR-509:
AUTO SCAN DISK
Scans the hard disk automatically when the power is switched
on.
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of [MENU] → [OPERATION MENU] →
[MAINTENANCE].
MAINTENANCE
AUTO SCAN DISK
MANUAL SCAN DISK
ALARM LIST CLEAR
DEFRAG DATABASE..
FORMAT..
MIRRORING..
PASSCODE SET..
MAINTENANCE/LOG..
AREA SELECT..
2. Select [AUTO SCAN DISK] with [ / ].
3. Select [ON] with [–/+].
4. Press the [SET] button.
• A confirmation screen will be displayed.
5. Select [SAVE] with [ / ], and then press the [SET]
button.
50
2.
3.
OFF
EXEC
EXEC
MANUAL SCAN DISK
Performs manual scanning of the hard disk. Perform Manual
Scan Disk regularly when the [AUTO SCAN DISK] item in the
menu is set to "OFF" or when the power to the equipment
remains on for extensive periods of time. (About once a month)
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of [MENU] → [OPERATION MENU] →
[MAINTENANCE].
MAINTENANCE
AUTO SCAN DISK
MANUAL SCAN DISK
ALARM LIST CLEAR
DEFRAG DATABASE..
FORMAT..
MIRRORING..
PASSCODE SET..
MAINTENANCE/LOG..
AREA SELECT..
2. Select [MANUAL SCAN DISK] with [ / ], and then
press the [SET] button.
• The SCAN DISK function will be executed.
•
Press the [CANCEL] button to abort the scandisk
process.
•
This has no effect if the scandisk process is stopped in
the middle of progress.
•
There are cases where the time required for ending the
process is extended if the size of the recorded event is
large or there are a large number of events (several
hours).
•
Recording, playback and search functions cannot be
used when the scandisk procedure is running.
CAUTION
The manual scandisk process cannot be executed when in
the following operation modes:
•
During recording.
•
During the playback of recorded images.
•
When the timer is ON.
•
During DVD export.
•
When a malfunction occurs with the hard disk.
OFF
2.
EXEC
EXEC
Advertisement
Table of Contents
Troubleshooting
