Covert Channel; Record Setup; Rec Pattern Set; Alarm Rec - JVC VR-509E Instructions Manual

Changing VR-509 Settings Using a PC

COVERT CHANNEL

1. Click on "WEB DISPLAY" → "COVERT CHANNEL" in
that order.
2. Change the settings. (See page 27 for details)
3. Click on the [SAVE] button.
(Click on the [RESET] button to return to the setting values
on the main unit.)

RECORD SETUP

1. Click on "FUNCTION" → "RECORD SETUP" in that
order.
2. Change the settings. (See page 30 for details)
3. Click on the [SAVE] button.
(Click on the [RESET] button to return to the setting values
on the main unit.)
84

REC PATTERN SET

It is possible to change the default recording parameters for
each mode on the same screen as the setup mode selection
screen.
1. Click on "FUNCTION" → "REC PATTERN SET" in that
order.
2.
3.
2. Select the mode to be set up.
3. Change the settings. (See page 31 for details)
4. Click on the [SAVE] button.
(Click on the [RESET] button to return to the setting values
on the main unit.)
* When the display is grayed out, it indicates that the
2.
3.

ALARM REC

1. Click on "FUNCTION" → "ALARM REC" in that order.
2. Select the camera to be set up.
3. Change the settings. (See page 31 for details)
4. Click on the [SAVE] button.
(Click on the [RESET] button to return to the setting values
on the main unit.)
* When the display is grayed out, it indicates that the
camera input settings for the [CAMERA SETUP-1] that
correspond to the grayed out cameras have been set to
[DISCONNECT]. (See page 20)
camera input settings for the [CAMERA SETUP-1] that
correspond to the grayed out cameras have been set to
[DISCONNECT]. (See page 20)
2.
3.
4.
2.
3.
4.