Activating Activex Control And Plug-Ins - JVC VR-509E Instructions Manual

Explanations

Activating ActiveX Control and Plug-ins

Follow the procedures explained below to activate ActiveX Control and plug-ins with Internet Explorer if they are not already
activated.
Starting up Internet Explorer
Select [Tools] → [Internet Options] → [Security], and then
click on [Trusted Sites].
This will enable the [Trusted Sites [Site...]] window to be
opened. Click on this to open the [Trusted Sites] window.
Enter the IP address that is set in the VR-509 [Setting up a
Network] field in the [Add this Website to the zone:] field,
and then press the [Add] button. (Note that the http://
192.168.0.10 IP address listed in the following illustration is
only an example.)
Remove the tick from the [Require server verification
(https:) for all sites in this zone] check box.
Select [Tools] → [Internet Options] → [Security], and
then click on [Trusted Sites].
Select the [Custom Level] button and open the [Security
Settings] window.
Set all of the [ActiveX Controls and Plug-ins] fields to
[Enable] on the open window.
108