Mounting The Base - JVC TK-C205VP Instructions Manual

Installation and connection

Mounting the Base

Remove the camera unit from the base and mount the base to the pipe.
• Do not remove the protective sheet affixed to the dome cover until installation work is
completed.
Removing the sheet during installation may result in scratching of the dome cover.
1.
Dome
cover
2.
E-10
Wrench
Base
Camera unit
1.
Remove the dome cover from the
base
Loosen the Tamper-resistant screws
fixing the dome cover (3 locations) by
using the provided wrench and turning
counterclockwise.
2
.
Remove the camera unit from the
base
Loosen the screws on the camera unit
in the order of
the camera unit from the base.
MEMO
Dome cover and camera unit are con-
nected by the safety cable and base.
and and remove