Installation Procedure - JVC KY-F75 Instructions Manual

Installation procedure

1.
Install the IEEE1394 host adapter card KA-FW4IU and the drivers before installation of the
[KY-LINK] application software.
For how to install the KA-FW4IU, refer to the instructions for the KA-FW4IU. Also, for
installation of the driver, see the Readme file on the CD-ROM supplied with the KY-F75.
2.
Install of the [KY-LINK] application software as follows.
Insert the CD-ROM supplied with the KY-F75 into the computer's CD-ROM drive.
Select the \ENU\Kylink folder on the CD-ROM, and double-click Setup.exe.
The setup screen appears. Follow the instructions on the screen to execute the setup.
When the setup is completed, the application software [KY-LINK] will be ready to use
after the computer has been restarted.
MEMO
To uninstall the [KY-LINK] application software, select Control Panel
LINK.
Double-click Setup.exe
Add/Remove Programs KY-
E13