Freezing The Image - JVC KY-F75 Instructions Manual

3. Recording (continued)

Freezing the image

Live image is shown on the monitor at a rate of 7.5 frames per second.
The following describes the procedure for freezing a required image. (Still image displayed)
[Freeze/Cancel]
button
Living image
1.
The image is frozen when the [Freeze/Cancel] button is clicked. (Still image displayed)
2.
To stop display of the frozen image, click the Freeze button again.
When an external trigger device is connected
The frozen image can be turned ON/OFF by the trigger input through the [REMOTE] connector
on the KY-F75.
Interlocking with the flash
When a flash is connected to the [REMOTE] connector on the KY-F75, the flash can be made to
fire in synch with KY-LINK freeze operation or the external trigger input. (
However, in the following case, the flash will fire irrespective of the trigger.
During auto white balance operation
When one or more of the functions auto iris, EEI, and ALC is/are used
MEMO
The freeze function of the KY-F75 is accomplished in the memory of the computer by stopping the
output of the camera image. Accordingly, if the trigger is input to the camera while the live-window is not
shown, an image will not appear even if the live-window is displayed.
E22
Tool bar
page E43)