JVC KY-F75 Instructions Manual page 15

When the motorized lens is used
Connect to power supply
(page. 16)
[IEEE1394]
Supplied clamp filter
[LENS]
Compatible
zoom lens
Fujinon S16 × 7.3DA-DSD
Control of the motorized lens is not possible when the [IEEE1394] connector is used to supply
the power.
When the motorized lens is used, the separately sold AC Adapter AA-P700 should be used to
supply the power to the camera.
Connect the [DC IN] connector on the KY-F75 to the AA-P700 using the DC power cable.
Attach the clamp filter supplied with the KY-F75 to the DC power cable.
Connect the camera cable from the lens to the [LENS] connector on the KY-F75.
Connect the zoom and focus control cable from the lens to the lens remote control.
The lens control possible with this unit is only control of the iris. Control of zoom and focus
requires a separately sold lens remote control unit.
Precautions for connection
Do not turn the AC adapter's power switch ON or OFF, or connect or disconnect the IEEE1394
cable, while the application software [KY-LINK] is running.
When connecting 2 or more cameras to one computer, multiple images can-
not be shown at the same time.
When using a microscope adapter, use a 1/2" C-mount adapter fitting the
microscope to be used. To reduce the risk of the adapter causing damage to
the camera, use an adapter that is 4 mm shorter than the lens mount surface.
AA-P700
AC ADAPTER AA-P700
POWER
ON
OFF
AC Adapter
IEEE1394 cable
[REMOTE]
[DC IN]
Control
cable
Flash
Lens remote control
Fujinon RMD-10
AC
KA-FW4IU (separately sold)
Trigger switch
CD-ROM supplied with KY-F75:
Exclusive application software
[KY-LINK] and drivers for KA-
FW4IU
PC
4 mm or
shorter
E11