Using The Remote Desktop Method; Hp Storage Server Management Console - HP ProLiant ML310 User Manual

Figure 3 HP Storage Server Management console

Using the Remote desktop method

Remote Desktop provides the ability for you to log onto and remotely administer your server, giving you a
method of managing it from any client. Installed for remote administration, Remote Desktop allows only
two concurrent sessions. Leaving a session running takes up one license and can affect other users. If
two sessions are running, additional users will be denied access.
To connect the storage server to a network using the remote desktop method
1.
On the PC client, select Start > Run. At Open, type mstsc, then click OK.
2. Enter the serial number of the storage server followed by a hyphen (-) in the Computer box and
click Connect. For example: D4059ABC3433-.
NOTE:
If you are able to determine the IP address from your DHCP server, you can substitute the IP
address for the serial number and hyphen (-). For example: 192.100.0.1.
3.
Log in to the HP ProLiant Storage Server with the default user name administrator and the
password hpinvent.
The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard
will start automatically.
NOTE:
You can change the administrator name and password when you configure the server
using the
4.
To complete network configuration using the Rapid Startup Wizard, see
the network" on page 25.
22
Installing and configuring the server
"Rapid Startup Wizard" on page 26.
"Configuring the server on