Using The Remote Desktop Method - HP ProLiant DL380 G4 Installation Manual

7. On the Internet Options dialog box, click OK to finish.
To connect the storage server to a network using the remote browser
method
1.
On the remote client machine open Internet Explorer and
enter https:// and the serial number of the storage server
followed by a hyphen (-), and then:3202. For example,
https://D4059ABC3433-:3202 Press Enter.
NOTE:
You can substitute the IP address for the serial number, if
you are connected through DHCP.
2. Click OK on the Security Alert prompt.
3.
Log in to the HP ProLiant Storage Server Management console with the
default user name administrator and the password hpinvent.
NOTE:
You can change the administrator name and password
when you configure the server using the
Wizard" on page 42.
4.
To complete network configuration using the Rapid Startup Wizard,
see "Configuring the server on the
IMPORTANT:
If you are using the remote browser method to access the HP Storage
Server Management console and Rapid Startup Wizard, always close
the remote session before closing your Internet browser. Closing the
Internet browser does not close the remote session. Failure to close your
remote session impacts the limited number of remote sessions allowed on
the storage server at any given time.

Using the Remote desktop method

To connect the storage server to a network using the remote desktop
method
1. On the PC client, select Start > Run. At Open, type mstsc, then click
OK.
34
Accessing the HP Storage Server Management console
"Rapid Startup
network" on page 39.