Palm TREO PRO User Manual page 267

IR: Select Infrared. Point the IR port on
your smartphone directly at the IR port
of the receiving device. A red icon
indicates an IR connection.
4 Wait for Done to appear next to the
name of the receiving device before you
continue using your smartphone.
The regional setting determines the list of
TIP
characters that can be used when info is
beamed between devices. If you try to send
or receive a character that is not on the list, it
appears as a question mark (see Setting
display formats).
Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
Turning on the option to receive beamed
information
By default, the option to receive beamed
information on your smartphone is turned
off. You need to turn the beam option on
before you can receive information being
beamed from another device.
1 Press Start
2 Select the Connections tab, and then
select Beam
3 Check the Receive all incoming
beams box.
Receiving beamed information
1 Press End
is not already on.
2 If you are beaming over an IR
connection, point the IR port on your
smartphone directly at the IR port of the
transmitting device.
3 When the Receiving Data message
appears, select Yes to receive the
beam.
and select Settings.
.
to turn on your screen if it
B E A M I N G I N F O R M A T I O N
12
267