Compaq CONTURA AERO Maintenance And Service Manual page 93

Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
DMA register read/write test failed
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
Protected mode test failed enabling/disabling A20 or
entering/existing protected mode
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
Failed entering protected mode for memory test
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
Test of timer zero interrupt failed (no interrupt
occurred)
162 System Options Not Set
2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Configuration incorrect
162 System Options Not Set
2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
CMOS reflects that an invalid configuration has been
set