Compaq CONTURA AERO Maintenance And Service Manual page 67

To replace the LCD panel, follow these steps:
1. Remove the pressure sensitive adhesive backing from the back of the
display cable. Align the holes in the cable with the mounting pins on
the display enclosure.
2. Connect the display cable to the LCD panel by inserting it into the ZIF
connector.
3. Lay the LCD panel into the display enclosure with the bottom of the
display cable exposed.
IMPORTANT: Ensure that the ferrite [1] on the display cable is not pinched
between the display enclosure and the ZIF connector [2]
(Figure 3-33).