Compaq CONTURA AERO Maintenance And Service Manual page 92

Probable Cause:
Recommended Action: 1. Verify the correct ROM.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: 1. Verify the correct ROM.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: 1. Verify the correct ROM.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
Recommended Action: Replace the system board.
---------------------------------------------------------------------------
Message:
Beeps:
Probable Cause:
System, ROM checksum error
2. Replace the system board.
101 ROM Error
1 Long, 1 Short (Beeps can be disabled by the user from
the Computer Setup utility.
Second system ROM does not pass the checksum
2. Replace the system board.
101 ROM Error
1 Long, 1 Short (Beeps can be disabled by the user from
the Computer Setup utility.
Option ROM does not pass the checksum
2. Remove PCMCIA card and retest.
3. Replace the system board.
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
System Board
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
Counter zero check failed
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
Refresh bit does not toggle
102 System Board Failure
None (Beeps can be disabled by the user from the
Computer Setup utility.
CMOS read/write failed