Compaq CONTURA AERO Maintenance And Service Manual page 64

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When servicing these subassemblies, ensure that cables are placed in their
proper location to avoid pinching during the reassembly process. Improper
cable placement can cause severe damage to the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To replace the inverter board, follow these steps:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Because of high susceptibility to electrostatic discharge that will damage
the LCD panel, these steps must be followed whenever replacing any
component in the display assembly.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
1. Connect the inverter board connector to the display cable.
2. Connect the backlight cable to the inverter board.
3. Place the inverter board with the component side down on the right side
of the display enclosure and secure with three screws.