Recording - Onkyo TX-L55 Instruction Manual

Advanced Operation —Continued

Recording

This section explains how to record to an AV component
with recording capability.
ON STANDBY
I
1 2 3
4 5 6
7 8 9
+10 0
CLEAR
--/---
TONE
_
+
DVD V1 V2
INPUT
INPUT SELECTOR
SELECTOR TV AUX TUN
DIMMER
TV
INPUT
+
CH
ENTER
DISC
-
EXIT GUIDE
PREV
CH
DISPLAY
PLAY MODE SP A SP B
AUDIO SUBTITLE ANGLE
DIRECT STEREO SURR
REPEAT A-B SEARCH
Recording the Current Input Source
You can record the audio and video, or just the audio
from the current input source to an AV component con-
nected to the VIDEO 1 OUT and AUDIO VIDEO 1 OUT
sockets.
1
Use the INPUT [
to select the input source that
you want to record.
Audio signals from the selected input
source are output by the AUDIO
VIDEO 1 OUT sockets.
Video signals from the selected input
Remote
source are output by the VIDEO 1 OUT
controller
sockets.
DVD V1 V2
You can listen to and watch the selected
INPUT SELECTOR
input source while recording. The
TV AUX TUN
TX-L55's MASTER VOLUME control
has no effect on recording.
2 Start recording on the AV compo-
nent connected to the VIDEO 1
OUT sockets.
3 Start playback on the source
component.
Notes:
• You cannot record audio from a component that's con-
• Surround sound and DSP listening mode effects
MASTER VOLUME
INPUT
• You cannot record from a component that's connected
• If you select another input source while recording, that
• Copy-protected DVDs cannot be recorded.
• DTS signals will be recorded as noise, so don't try and
T V
INPUT
Recording from Separate AV Sources
+
TV CH
-
You can record audio and video from two separate
T V VOL
sources, allowing you to overdub audio onto your video
REMOTE
MODE recordings. This works because when an audio-only
AMP
TUNER
input source (i.e., TUNER, TV, or AUX) is selected, the
DVD
TV
video input source remains the same. For example, if you
SLEEP
select the VIDEO 2 input source, followed by the AUX
input source, you can watch video from the VIDEO 2
VOL
input while listening to audio from the AUX input.
MUTING
In the following example, audio from a CD player con-
nected to the AUX IN sockets, and video from a cam-
RANDOM
corder connected to the VIDEO 2 IN socket are recorded
LAST M
DSP
by a VCR, which is connected to the VIDEO 1 OUT
MEMORY
sockets.
1
2
]/[ ] buttons
3
4
5
Notes:
• Audio from only the TUNER, TV, VIDEO 2, and
nected to a DIGITAL INPUT. You must use an analog
audio input.
cannot be recorded.
to the DVD multichannel input.
source will be recorded instead.
record from DTS CDs or LDs.
Prepare the camcorder and CD
player for playback.
Prepare the VCR for recording.
Select the VIDEO 2 input source.
This selects the camcorder as the video
source.
Select the AUX input source.
This selects the CD player as the audio
source, but leaves the camcorder as the
video source.
Start recording on the VCR and
start playback on the camcorder
and CD player.
The video from the camcorder and the
audio from the CD player are recorded
by the VCR.
AUX input sources can be recorded.
47