Rear Panel - Onkyo TX-L55 Instruction Manual

Front & Rear Panels —Continued

Rear Panel

1
7 8 9 J K
For detailed information, refer to the pages in
parenthesis.
A
FM ANTENNA (18)
This socket is for connecting an FM antenna.
B
DIGITAL INPUT OPT 1, OPT2 & COAX (20–23,
25–28)
These optical and coaxial digital audio inputs can be
used to connect a DVD, CD, LD (laser disc) player
or other components with digital audio outputs.
C
COMPONENT VIDEO INPUT 1, 2 (20–23, 25,
26)
These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players and TVs. Component video
connections provide better picture quality than
S-Video. Use dedicated component video cables.
D
MONITOR OUT (21, 22)
These component video, S-Video, and composite
video outputs can be connected to the video inputs
on your TV or projector.
Only video signals from a video input of the same
format are output. For example, the COMPONENT
MONITOR OUT outputs component video signals
received by COMPONENT VIDEO INPUT 1 or 2,
not an S-Video or composite video input.
E
FRONT SPEAKERS (16, 17)
These terminal posts are for connecting front
speakers.
F
SPEAKERS (16, 17)
These push terminals are for connecting surround
left, surround right, center, and surround back
speakers.
G
REMOTE CONTROL (29)
This (Remote Interactive) socket can be con-
nected to the socket on another Onkyo compo-
nent. The TX-L55's remote controller can then be
used to control that component. To use
must make an analog audio connection (RCA)
10
2 3
L M N O P
H
I
J
K
L
M
N
O
P
, you
4 5 6
between the TX-L55 and the other component, even
if they are connected digitally.
Note:
can only be used with Onkyo components.
SUBWOOFER PRE OUT (17)
A powered subwoofer can be connected here.
AUX AUDIO IN (27, 28)
An audio component such as a CD player can be
connected here by using an RCA audio cable.
VIDEO 2 AUDIO IN (25, 27)
The audio output of a set-top box (cable, satellite,
over-the-air) can be connected here by using an
RCA audio cable.
VIDEO 1 AUDIO IN/OUT (24, 25, 27)
The audio input and output of a VCR or MD
recorder can be connected here by using RCA audio
cables.
TV AUDIO IN (22)
The audio output of a TV can be connected here by
using an RCA audio cable.
DVD MULTI CH IN (24)
The stereo analog audio output or multichannel
(5.1-channel) analog audio output of a DVD player
can be connected here.
VIDEO 2 IN (25, 26)
The S-Video or composite video output of a set-top
box (cable, satellite, over-the-air) can be connected
here.
VIDEO1 IN/OUT (24, 25)
The S-Video or composite video input and output of
a VCR can be connected here.
DVD IN (23)
The S-Video or composite video output of a DVD
player can be connected here.