Recording A Source - Onkyo TX-8511 Instruction Manual

Recording a source
2 VIDEO-1V0e DEO-2VCH TAPE-2 MONITOR
TAPE
Recording |
TX-8511
Tape deck
(TAPE-1, TAPE-2)
| Playback
Turntable
CD player
VCR, VDP
TX-8511
Recording ||
Tape deck (TAPE-2)
| | Playback
Tape deck (TAPE-1)
RO aan e ites Fen Gre OAR EES?
Please read the instruction manuals con-
cerning the operation of each unit.
1. Insert a blank tape into the tape deck.
2. Press the button (other than TAPE-2
MONITOR) of the source from
which you want to record.
e@ When VIDEO-1/VDP or VIDEO-2/
VCR is selected, it will (naturally) only
record the audio.
e@ When FM or AM is selected, set the
tuner to the station you want to record
from.
@ When TAPE-1 is selected, it will record
to the TAPE-2.
e When either VIDEO-I/VDP, VIDEO-
2/VCR, FM, AM, PHONO or CD is
selected, you are able to record to both
the TAPE-1 and TAPE-2.
3. Put the tape deck in the recording
mode. Begin playing the source.
Set the proper recording level using the
controls on the tape deck used for record-
ing. Also, during recording and dubbing
operations, if any controls (bass, treble
etc.) on this unit are changed during
recording and dubbing operations, the tone
effects will not change.
NOTE:
Recording from TAPE-2 to TAPE-] is not
possible.
1. Load the original tape in TAPE-1
tape deck and the blank tape in
TAPE-2 tape deck.
2. Press the TAPE-1 button.
3. Put TAPE-1 tape deck in the play-
back mode and TAPE-2 tape deck in
recording mode.
21