Dolby Digital/Dts Setting (5.1- Or 6.1-Channel Playback) - Onkyo TX-L55 Instruction Manual

Using the Listening Modes —Continued
Dolby Digital/DTS Setting
(5.1- or 6.1-channel Playback)
This setting determines if Dolby Digital and DTS mate-
rial is played using 6.1-channels or 5.1-channels. This
setting only applies when you're using a surround back
speaker, the Speaker Configuration Surr Back setting is
set to something other than Non (page 48), and the sur-
round information in the current digital input signal is 3/
2.1 or 3/3.1. To check the format of a digital input signal,
see "Displaying Source Information" on page 46.
ON STANDBY
T V
I
1 2 3
4 5 6
7 8 9
+ 10 0
CLEAR
--/---
TONE
_
+
DVD V1 V2
INPUT SELECTOR
TV AUX TUN
DIMMER
TV
ENTER
INPUT
+
CH
ENTER
DISC
-
EXIT GUIDE
PREV
CH
DISPLAY
PLAY MODE SP A SP B
AUDIO SUBTITLE ANGLE
DIRECT STEREO SURR
REPEAT A-B SEARCH
- +
TUN M
TUN TUN
LEVEL
-
TEST TONE CH SEL
OPEN/CLOSE VIDEO OFF
L.NIGHT
RC-577S
1 Press the REMOTE MODE [AMP]
button followed by the [SETUP]
AMP
TUNER
button.
INPUT
+
TV CH
-
T V VOL
REMOTE
MODE
AMP
AMP
TUNER
DVD
TV
SLEEP
VOL
This setting affects Dolby Digital and DTS sources as
follows:
MUTING SETUP
Dolby Digital
RANDOM
LAST M
DSP
MEMORY
P MEM
LEVEL
+
CINE FLTR
DTS
2
Use the Up and Down [ ]/[ ]
buttons to select "5. Audio Adj,"
and then press [ENTER].
ENTER
ENTER
3
Use the Up and Down [ ]/[ ]
buttons to select "Surr Bk," and
then use the Left and Right [
ENTER
[ ] buttons to select Auto, On, or
Off.
4
Press the [SETUP] button.
The setup menu closes.
Auto: If the source signal contains a Dolby Digital
EX flag, Dolby Digital EX 6.1 is used. If not,
Dolby Digital 5.1 is used.
On: Dolby Digital EX 6.1 is used regardless of
whether the source signal contains a Dolby
Digital EX flag. You can choose Dolby Digital
EX or PL IIx Music mode with the [SURR]
button.
Off: Dolby Digital 5.1 is used even if a Dolby Dig-
ital EX flag is present.
Auto: If the source signal contains a DTS-ES flag,
DTS-ES Discrete (6.1) or DTS-ES Matrix
(6.1) is selected automatically. If not, DTS 5.1
is used.
On: DTS-ES 6.1 is used regardless of whether the
source signal contains a DTS-ES flag. If the
source signal contains a DTS-ES flag, DTS-ES
Discrete (6.1) or DTS-ES Matrix (6.1) is
selected automatically. If the source signal
does not contain a DTS-ES flag, you can
choose DTS+Dolby EX, PL IIx Music, or
DTS+Neo:6 with the [SURR] button.
Off: DTS 5.1 is used for all DTS sources, even if a
DTS-ES flag is present.
]/
43