Recording A Source; Dimmer; Muting; Super Bass Boost - Onkyo DR-635 Instruction Manual

2
Press the DVD, USB, FM, or LINE buttons to select
a source.
The selected source is shown on the front panel's
display.
Press the LINE button repeatedly to switch between
LINE1 and LINE2.
Also, each time the INPUT button of the main unit
is pressed, the source changes as follows:
DVD Source
USB Source
FM Radio
LINE1 Source
LINE2 Source
3 Play the source, and adjust the volume using the
VOL buttons.
You can rotate the VOLUME knob on the unit to
reduce or bring up the volume continuously.
Press the ON/STANDBY button to put the unit
in the standby mode when it is not being used.

Recording a Source

You can record a source onto a CD Recorder or a cas-
sette tape recorder connected to the DIGITAL OUT ter-
minal or the LINE OUT jacks.
1. Select a source to be recorded by pressing the
DVD, USB, FM, or LINE buttons.
2. Start recording.
When the recording device is connected to the
LINE1IN jack and the LINE OUT jack, you cannnot
select the LINE1Source for the recording source.

Dimmer

Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.

Muting

To mute the sound temporarily, press the MUTING
button. Press the MUTING button again to restore the
sound.
"MUTING" blinks on the display while muting is
engaged.
If you change the volume when the sound is muted,
it will be unmuted.

Super Bass boost

You can reinforce the bass sound to maintain rich, full
bass at low volume.
Press the S.BASS button to get the effect. Press this
button again to cancel the effect.

Adjusting the bass and treble

You can change the bass and treble sound between
"-5" to "+5".
13