Connecting Your Dvd Player - Onkyo TX-L55 Instruction Manual

Connecting AV Components —Continued

Connecting Your DVD player

Video Connections
You only need to use one of the following video connec-
tion methods.
■ Using Composite Video
Use a composite video cable to connect the TX-L55's
V DVD IN to the composite video output on your DVD
player, as shown.
• Your TV must also be connected via composite video.
VIDEO OUT
DVD player
■ Using S-Video
Use an S-Video cable to connect the TX-L55's S DVD
IN to the S-Video output on your DVD player, as shown.
• Your TV must also be connected via S-Video.
S VIDEO OUT
DVD player
■ Using Component Video
Use a component video cable to connect the TX-L55's
COMPONENT VIDEO INPUT 1 to the component
video output on your DVD player, as shown.
• Your TV must also be connected via component video.
COMPONENT
VIDEO OUT
Y P P
B R
DVD player
Audio Connections
Note:
• Initially, the COAX digital input is assigned to the
DVD input source. If you connect your DVD player to
a different digital input or only to an analog input,
you'll need to assign it to the DVD input source (see
page 31).
■ Using a Coaxial or Optical Connection
• Use a coaxial digital audio cable to connect the
TX-L55's COAX DIGITAL INPUT to the coaxial
output on your DVD player, as shown.
OR
• Use an optical digital audio cable to connect the
TX-L55's OPT 1 DIGITAL INPUT to the optical
output on your DVD player, as shown.
IN
DVD
IN
DVD
■ Using Analog Connections
Even if your DVD player is connected digitally (coaxial
or optical), to use
to make analog connections as well.
Use an analog audio cable to connect the TX-L55's DVD
MULTI CH IN FL/FR to the analog audio outputs on
your DVD player, as shown.
If your DVD player has a multichannel output, be sure to
use the left and right outputs.
Y P P
B R
COMPONENT VIDEO INPUT 1
OPT1
Connect one or the other
DIGITAL OUT
OPTICAL
DVD player
, or to record from it, you'll need
FL
DVD player
COAX
DIGITAL OUT
COAXIAL
FR
DVD
R L
AUDIO
OUTPUT
23