Connecting Power Supply; Turning On The Power - Christie LW400 User Manual

Connecting power supply

1. Connect the connector of the power cord to the AC IN
inlet) of the projector.
2. Firmly plug the power cor
WARNING
►Please use extra caution when connecting the power cord, as incorrect or faulty
connections may result in fi re and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult your
dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power cord.
The power outlet should be close to the projector and easily accessible. Remove the
power cord for complete separation.
• Never modify the power cord.

Turning on the power

1. Make sure that the power cord is fi rmly and correctly connected
to the projector and the outlet.
2. Remove the lens cover, and set the power switch to the ON
position (marked " I I ").
The POWER POWER indicator will light up in steady orange. Then
wait several seconds because the buttons may not function for
these several seconds.
3. Press the STANDBY/ON STANDBY/ON button on the projector or the remote
control.
The projection lamp will light up and the POWER
begin blinking in green. When the power is completely on, the
indicator will stop blinking and light in steady green.
WARNING
►A strong light is emitted when the projector's power is on. Do not look into the lens
of the projector or look inside of the projector through any of the projector's openings.
NOTE
• When the AUTO ON in the OPTION menu is set to the TURN ON , and the power was turned
off by the power switch last time, turning the power switch on makes the projection lamp light
on without pushing the STANDBY/ON
Guide " in the CD.
LW400 User Manual - Concise
020-000051-01 Rev.1 (05/08)
d
's plug into the outlet.
POWER indicator will
STANDBY/ON button. For more information, please see the " Operating
AC IN (AC
AC IN (AC inlet)
AC IN
STANDBY/ON button
STANDBY/ON
STANDBY/ON
BLANK
ASPECT
PUSH ENTER
PAGE UP
ESC
POSITION
MAGNIFY
ON
OFF
FREEZE
4
Connector of the
power cord
to the outlet
POWER indicator
POWER
LASER
INDICATOR
VIDEO RGB
MY SOURCE/
DOC.CAMERA
SEARCH
LASER
PAGE DOWN
MENU RESET
AUTO PbyP
MY BUTTON VOLUME
1 +
2 -
KEYSTONE MUTE
Power
switch