Loading Transparencies And Labels - Minolta Color PAGEPRO PLUS Manual

Loading Paper: Loading Transparencies and Labels

Loading Transparencies and Labels

Precaution
• Labels must be loaded onto Tray 1 (multipurpose tray) only. Do not
load them onto Tray 2 (second tray) / Tray 3 (third cassette).
• Wearing gloves is recommended when handling transparencies to pro-
tect them from becoming soiled with fingerprints and smears.
Dirty transparencies may result in an unsatisfactory printed image.
• Do not use the following types of paper as they may cause reduced
print quality, a misfeed or a failure.
Labels which are easily or partially peeled
Labels which are leaking adhesives
It is highly recommended to test any label's compatibility with the
printer before purchasing it in large quantities.
• Multiple transparencies or labels can be printed continuously but the
feeding capability may be affected by the materials used and the oper-
ating environment. It may be necessary to load them individually.
• It is necessary to change the media setting whenever transparencies or
labels are printed (refer to pages 4-8 and 4-521
• ). Remember to change not only the printer driver settings but the
media settings on the printer unit as well (please follow the instruc-
tions on page 2-34).
• The following transparency types are recommended:
For color printing, Minolta CF-200 (D) or 3M CG3710
For monochrome printing, Minolta M-100 (D) or 3M PP2500
2-31