Minolta Color PAGEPRO PLUS Manual page 89

• When
AUTO CONTINUE
ing the message "
pressed.
• The factory default is
4-3. I/O TIMEOUT
• The time between the end of the print job to the idle mode.
After this period has elapsed, the controller frees the port.
• The settings are
MINUTE, 3 MINUTES
• The factory default is
4-4. POWER SAVE
• Selects the default
• The controller sends the power-down command to the printer
after a certain period of idle time has passed. The printer will
not go into
power save
• The settings are
.
OFF
• The factory default is
4-5. DISPLAY LANGUAGE
• Selects the default language of the panel.
• 8 languages are possible:
ITALIANO, NEDERLANDS, ESPAÑOL, DANSK
CEŠTINA.
• The factory default is
Outline of the MENU Utilities
is " ", printing will continue dur-
ON
LOAD PAPER SIZE
.
ON
5 SECONDS, 15 SECONDS, 30 SECONDS, 1
and .
OFF
15 SECONDS
mode.
power save
mode if data still exists in the memory.
15 MINUTES, 30 MINUTES, 60 MINUTES
60 MINUTES
ENGLISH, DEUTSCH, FRANCAIS,
.
ENGLISH
" as if the Proceed key is
.
.
and
and
3-12