When The Route Guidance Starts; Cancelling The Route Guidance - Pioneer AVIC-HD3 Operation Manual

(8) Check the shape of route
You can check the overall shape of your route and
the location of destination on the map.
➲ Refer to the steps after Step 2 of "Checking
the entire route overview on the map" ➞
Page 28
(9) Adding and edit waypoint
You can add, remove, or sort waypoints.
➲ "Editing Waypoints" ➞ Page 29

When the route guidance starts

Touching [OK] in "Route confirmation screen"
starts the route guidance on the displayed route.
Your navigation system gives you the following
information with the timing adjusted to the speed
of your vehicle:
— Distance to the next turning point
— Direction of travel
— Road number of the motorway
— Arrival of waypoint (If waypoints are set)
— Arrival of your destination
❒ Touching or
voice guidance on or off.
❒ Touching
information again.
❒ If you stop at a petrol station or a restaurant
during the route guidance, your navigation
system remembers your destination and route
Information. When you start the engine and
get back on the road, the route guidance
resumes.
❒ If you deviate from the route with guidance set
to [Street List Mode] or [Mixed Mode] and
enter a street not recorded on the hard disk
drive, the screen changes to [Map Mode].
When you return to the route, the screen
returns to the original view and resumes route
guidance.
26
allows you to turn the
allows you to hear the
Basic items on the screen
This section describes only the basic items that
are displayed on the Map Mode screen.
➲ Details of the map screen ➞ Page 31
(2) (3)
(1) Current location
(2) Distance to the destination
(3) Estimated time of arrival (default)
(4) ON/OFF key for voice guidance

Cancelling the Route Guidance

If you no longer need to travel to your destination
or if you want to change your destination, follow
the steps below to cancel the route guidance.
1
Touch [Destination] in the navigation
menu, then touch [Cancel Route].
A message confirming whether to cancel the
current route appears.
2
Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
On this screen, you can also select the follow-
ing items:
[Skip]:
Skip the route to the selected waypoint, and
recalculate the route. (The skipped waypoint
will not be deleted.)
[No]:
Returns to the previous display without delet-
ing the route.
(1) (4)