About Steering Remote Control - Pioneer AVIC-HD3 Operation Manual

Select a source by using AV button
You can press the AV button to switch the
source.
1
Press the AV button to switch Audio oper-
ation screen.
2
Press the AV button to select the desired
source.
Press the AV button repeatedly to switch
between the following sources:
[CD/ROM (MP3)/DVD] (built-in DVD drive)
— [LIBRARY] (Music Library) — [FM] (FM
tuner) — [AM] (AM tuner) — [iPod] (iPod) —
[M-CD] (multi-CD player) — [TV] (TV tuner)
— [AV INPUT] (video input) — [AUX] (auxil-
iary equipment) — [EXT 1] (external unit 1) —
[EXT 2] (external unit 2)
❒ In the following cases, the sound source
cannot to be used:
— When a unit corresponding to each source
is not connected to the navigation system.
— When no disc is set in the navigation sys-
tem.
— When no magazine is set in the multi-CD
player.
— When [AUX Input] is set to [Off].
➲ "Switching the auxiliary setting" ➞
Page 119
— When [AV Input] is not set to [Video].
➲ "Setting the video input" ➞ Page 118
❒ The term "external unit" refers to future Pio-
neer devices that are not currently planned
for, or devices that allow control of basic func-
tions although they are not fully controlled by
the navigation system. Two external units can
be controlled by this navigation system. When
two external units are connected, the naviga-
tion system allocates them to external unit 1
or external unit 2.
❒ When the [Auto ANT] mode is set to
[Radio], the vehicle's aerial can be stowed or
turned off by following the instructions below.
— Change the source from radio (AM or FM)
to another source.
— Turn the source off.
— Turn off the ignition switch (ACC OFF).
76
If the [Auto ANT] mode is set to [Power], the
vehicle's aerial can be stowed or turned off
only when the ACC is set to "OFF".
➲ [Auto ANT] ➞ Page 120

About Steering Remote Control

❒ When using the "CD-SR100" Steering Remote
Control (sold separately), the following but-
tons can be used for operation:
PHONE MENU button
Switches to Phone menu when Bluetooth unit
(sold separately) is connected.
VR ACTIVATION / OFF HOOK button
Press to accept the call when there is an incom-
ing call.
In other situations, press to start the voice opera-
tion.
VR CANCEL / ON HOOK button
Press to reject a call when there is an incoming
call.
Press to hang up the phone during talking on the
phone.
In voice operation, return to the previous screen.
 button:
Same function as P.LIST (/) button.
 button:
Same function as TRK (/) button.
+, – button:
Same function as VOL (/) button.
BAND button:
Same function as [Band] touch key.
SOURCE button:
Same function as AV button.