Checking And Modifying The Route - Pioneer AVIC-HD3 Operation Manual

8
Touch [OK] to decide your route.
Checking and modifying the
route
You can check the route details. You can also
recalculate the route in different conditions.
Route confirmation screen
(4)
(5)
(6)
(7)
(8)
(9)
(3) (2)
(1) Route calculation condition
Shows the route has been calculated under those
conditions.
• shows that fastest route is prioritised.
• shows that shortest route is prioritised.
• shows that using highways and main
roads are prioritised.
• shows whether the suggested route
includes motorways.
• shows whether the suggested route
includes toll roads. The current setting
appears.
• shows whether the suggested route
includes ferries. The current setting appears.
• shows whether the suggested route
includes learning routes. The current setting
appears.
In addition, if the calculated route has unin-
tended results, the following icons will be shown.
• shows that motorways could not be
avoided.
• shows that toll roads could not be avoided
when the setting [Avoid Toll Road] is [On].
(1)
• shows that ferries could not be avoided
when the setting [Avoid Ferry] is [On].
(2) Distance to the destination
(3) Travel time to destination
(4) Set the displayed route
Sets the displayed route as your route, and starts
the route guidance.
➲ "When the route guidance starts" ➞ Page 26
(5) Display multiple routes
You can select a desired route from multiple
route options. Calculated routes are shown in dif-
ferent colours.
Touching to
route. Touching [OK] returns to the previous dis-
play.
If you set waypoints, you cannot use the multiple
route option.
❒ There can be cases that the same route is dis-
played even when multiple routes are
searched.
❒ In multiple route calculations, both routes
that use and avoid the motorways are calcu-
lated independently of the setting for [Avoid
Motorway].
(6) Change the route calculation condition
Modify each calculation condition, and recalcu-
late the route.
➲ Refer to the steps after Step 3 of "Modifying
the Route Calculation Conditions" ➞ Page 27
(7) View the route profile
You can check the streets that you will travel to
reach the destination.
➲ Refer to the steps after Step 3 of "Checking
the passing streets with a list" ➞ Page 28
switch to another
25