Pioneer AVIC-HD3 Operation Manual page 157

Hdd av navigation head unit
Hide thumbs Also See for AVIC-HD3:
Table of Contents

Advertisement

Message
Bluetooth unit error. It is not possible
to find any mobile phones.
Bluetooth unit error. The device
name could not be set.
Registration is not available.
Reading failed.
Calibration failed.
Please refer to the owner's manual.
The HDD is not connected.
Cannot use HDD.
There is no applicable program.
The HDD cannot be operated due to
excessive heat.
Please move your vehicle to a safe
place and turn the power off until the
temperature goes down.
When
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or Bluetooth unit carries out
another processing when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or the Bluetooth unit carries
out another process when you
change the device name.
If you try to perform another opera-
tion immediately after connection
failure.
• If you transferred the data from
your mobile phone in a format can
not be received with navigation sys-
tem.
• Disconnection has been made dur-
ing transfer for some reason.
The touch panel calibration has not
been carried out with appropriate
steps.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Hard disk drive cannot run due to
high temperature.
What to do
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Wait for a while and retry.
• Select just a suitable item, format,
and then retry.
• Connect your mobile phone again
and retry.
Please read the instruction of touch
panel calibration and retry.
➞ Page 142
Consult your dealer.
Consult your dealer.
Consult your dealer.
Park your vehicle to safe place, turn
the ignition switch off, and wait until
the temperature inside the vehicle
drops.
155

Advertisement

Table of Contents
loading

Table of Contents