Searching For The Facilities Around The Scroll Cursor - Pioneer AVIC-HD3 Operation Manual

4
Touch the desired detailed category.
Previously set categories will have a red tick
mark.
5
Touch [Back].
Returns to the previous screen.
6
Repeat Step 2 to 5 to select a category.
You can select up to 100 items from the
detailed categories.
7
Touch [OK].
The POI in the selected category and subcate-
gory are searched.
Names of POIs and their distance from your
current location appear. They are listed in
order from nearest to farthest. To the left of
each item is an icon indicating the category.
Distance to the facility
8
Touch the desired POI to set your desti-
nation.
When the route is not set, route calculation
starts immediately.
➲ "Checking and modifying the route" ➞
Page 25
When the route is already set, "Location con-
firmation screen" is shown.
➲ "Checking the location on the map" ➞
Page 24
❒ When you touch
specified location are shown on a map.
46
, the POIs around the
Searching for the facilities
around the scroll cursor
Searching range is approximately 16 km
(10 miles) square from the scroll cursor.
❒ This can be used when Vicinity Search is
selected in Short-Cut Selection.
➲ Changing Shortcut ➞ Page 40
1
Scroll the map and move the scroll cursor
to the place where you want to search for
POI.
2
Touch .
The shortcut menu appears.
3
Touch .
See Step 2 of "Searching for the facilities
around the current position" for the following
operations.
➲ "Searching for the facilities around the
current position" ➞ Page 45
❒ The distance indicated in the search result
is the distance from the scroll cursor to the
facility.
❒ The bottom icon is for shortcuts to your
favourite categories. Touching the short-
cuts icon displays a list of the facilities in a
category.
➲ "Registering/deleting POI Shortcuts" ➞
Page 48
❒ [Vicinity Search] in the navigation menu
searches your surroundings. On the other
hand, in the case of
menu (➞ Page 36), the area around the
scroll cursor after the map is scrolled will
be searched.
in the Shortcut