Setting The Keyboard Layout; Changing The Unit Between Km And Miles; Changing The Virtual Speed Of The Vehicle - Pioneer AVIC-HD3 Operation Manual

The time difference between the time origi-
nally set in the navigation system (Australian
Eastern Standard Time) and the current loca-
tion of your vehicle is shown. If necessary,
adjust the time difference. Touching [+] or [–]
changes the time difference display in half-
hour increments.
The time difference can be set from –3 to +3
hours.
4
If necessary, set to summer time.
Summer time is off by default. Touch
[Summer Time] to change the time if you are
in the summer time period. This turns the dis-
play below summer time [On].
5
To finish the setting, touch [OK].

Setting the keyboard layout

You can select the type of keyboard to be used for
inputting characters.
1
Touch [Settings] in the navigation menu,
then touch [Regional Settings].
2
Touch [Keyboard] to select the layout
that you want to use.
Each time you touch the key changes that set-
ting.
[QWERTY] (default):
[QWERTZ]:
68
[ABC]:
[AZERTY]:
Changing the unit between km
and miles
This setting controls the unit of distance and
speed displayed on your navigation system.
1
Touch [Settings] in the navigation menu,
then touch [Regional Settings].
2
Touch [km / mile] to change the setting.
Each time you touch the key changes that set-
ting.
[km] (default):
Show distance in kilometres.
[mile]:
Show distance in miles.
[Mile&Yard]:
Show distance in miles and yards.
Changing the virtual speed of
the vehicle
When calculating the estimated time of arrival
and the number of hours to the destination, set
the average speed for the motorway or ordinary
roads using [+] and [–].
1
Touch [Settings] in the navigation menu,
then touch [Regional Settings].
2
Touch [Average Speed].