ZyXEL Communications P-663HN-51 Support Notes page 80

 The 192.168.1.1 is the IP address of the Prestige.

The local file is the source file of your configuration file that is available
in your hard disk.

The remote file is the file name that will be saved in Prestige.
 Check the port number 69 and 512-Octet blocks for TFTP.
 Check 'Binary' mode for file transfering.
Using TFTP command on Windows NT
Step 1: TELNET to your Prestige first before using TFTP command
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Download ZyNOS via LAN :
Step 4: Upload P-663HN-51 configurations via LAN:
[localfile] rom-0
Step 5: Download P-663HN-51 configurations via LAN:
rom-0 [localfile]
Using TFTP command on UNIX
Before you begin:
1. TELNET to your Prestige first before using TFTP command
2. Type the CI command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI)
Example:
All contents copyright © 2009 ZyXEL Communications Corporation.
P-663HN-51 Support Notes
c:\tftp -i [PrestigeIP] get ras [localfile]
c:\tftp -i [PrestigeIP] put
c:\tftp -i [PrestigeIP] get
80