ZyXEL Communications P-663HN-51 Support Notes page 59

P-663HN-51 Support Notes
Configuration for Wireless Station B
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-300 wireless NIC
card please follow the following step.
Step1: Double click on the utility icon in your windows task bar the utility will
pop up on your windows screen.
Step 2: Select configuration tab.
Step 3: Select Ad hoc from the operation mode pull down menu, fill you an
SSID and select a channel you want to use than press OK to apply.
Step 4: Since there is no DHCP server to give the host IP you must first
designate a static IP for your station. From Windows Start select Control
Panel >Network Connection>Wireless Network Connection.
59
All contents copyright © 2009 ZyXEL Communications Corporation.