Firmware/Configurations Uploading And Downloading Using Tftp - ZyXEL Communications P-663HN-51 Support Notes

Step 3: So that after you invoke the relevant commands, you could save the
logs you've captured.
2. Firmware/Configurations Uploading and Downloading using
TFTP
 Using TFTP client software
 Upload/download ZyNOS via LAN
 Upload/download Prestige configurations via LAN
(1) Using TFTP to upload/download ZyNOS via LAN
Step 1: TELNET to your Prestige first before running the TFTP software
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout
in Command Line Interface (CLI)
Step 3: Run the TFTP client software
Step 4: Enter the IP address of the Prestige
Step 5:To upload the firmware, please save the remote file as 'ras' to
Prestige. After the transfer is complete, the Prestige will program the upgraded
firmware into FLASH ROM and reboot itself.
An example:
All contents copyright © 2009 ZyXEL Communications Corporation.
P-663HN-51 Support Notes
78