Internet Access Using P-663Hn-51 Under Routing Mode - ZyXEL Communications P-663HN-51 Support Notes

P-663HN-51 Support Notes

2. Internet Access Using P-663HN-51 under Routing mode

For most Internet users having multiple computers want to share an Internet
account for Internet access, they have to install an Internet sharing device, like
a router. In this case, we use the P-663HN-51 which works as a general
Router plus an ADSL Modem.
Set up your workstation
(1) Ethernet connection
Connect the LAN ports of all cmputers to the LAN Interface of P-663HN-51
using Ethernet cable.
(2) TCP/IP configuration
Since the P-663HN-51 is set to DHCP server as default, so you need only to
configure the workstations as the DHCP clients in the networking settings. In
this case, the IP address of the computer is assigned by the P-663HN-51. The
P-663HN-51 can also provide the DNS to the clients via DHCP if it is available.
For this setup in Windows, we check the option 'Obtain an IP address
automatically' in its TCP/IP setup. Please see the example shown below.
41
All contents copyright © 2009 ZyXEL Communications Corporation.