Using Job Management Commands - Xerox Phaser EX7750 Job Management Manual

3
3-14 Using Command WorkStation and Command WorkStation LE
3. If the Import Options dialog box appears, specify the desired destination queue and
click OK.
You can control the display of the Import Options dialog box by specifying the
"Always show this dialog" option or setting the Show Import Options Dialog
preference (see page 2-29).
A destination queue is available only if the administrator enabled it in Setup (see the
Configuration Guide).
If you choose Hold, the job is imported into the Active Jobs window and held for
future action.
If you choose Print, the job is imported into the Active Jobs window and released for
immediate printing.
If you choose Direct, the job is sent directly to the EX7750 for printing. The job does
not appear in the Active Jobs window or Printed Jobs panel.

Using job management commands

As the operator, you can issue the following job management commands from the
Actions menu to release or hold selected jobs in the Active Jobs window and Printed
Jobs panel:
• Print
• Process and Hold
• Print and Hold
• Remove Raster Data
• Hold